• Guidance system
• Flush-mounted guidance system
• Escape route lighting
• Pedestrian crossing
• Roundabout / traffic islands
• Sorted by trade name
  • LeveLite
  • SignFlash
  • SoliLite
  • SwaroExit
  • SwaroLine
    • Wired
    • Wired MULTI
    • ILP - Inductive Low Power
    • IHP - Inductive High Power
      • SwaroLine module 100 IHP
      • SwaroLine induction coupler IHP
      • SwaroLine compensator IHP
      • SwaroLine cable IHP
      • SwaroLine control unit IHP
  • SwaroRail

• Swaroline cable IHP

SwaroLine cable IHP 2 x 6 mm² single insulated

Art.No. 8159 IHP_6E		SwaroLine cable IHP single insulated
Conductor properties:		copper blank 6 mm², Kl. 6 diameter: 3.3 mm
Sheath properties:		XLPE, insulation thickness ca. 1.6 mm, black, halogen free according to IEC 60754-1, flexible oil- and grease resistant, no corrosive fire gases according to IEC 60754-2, lean of smoke according to IEC 61034
Dimensions twin cable:		13.8 x 6.8 mm (+/- 0,2 mm)
Weight:		159 kg/km
Operating temperature continual:		-25° C up to +90° C
Operating temperature temporary:		qualified for bitumen casting installation below max. 2 cm of melted asphalt
Nominal voltage:		450 V / 750 V, 50 Hz
Test voltage:		3.5 kV / 50 Hz, 5 minutes
Copper standard:		ICE 60228 / CENELEC HD 383
Labeling:		with dimensions
Delivery:		in pieces of 200 m with ready made compensors or as end piece of 100 m